Zero Contamination Challenge.
Leader in Vacuum Ultrasonic Cleaning Systems in the world.
Vacuum Ultrasonic cleaning machines. Parts drying machines. Scalar Robot Transfer cleaning machines. Solvent- based, Hydrocarbon- based, DI-water and Detergent parts cleaning machines. Hydrocarbon Distiller. Spin dryer. Vacuum dryer. Environmental testing unit & pressure de-bubbling unit. Autoclave for LCD, acrylic panel, glass, electric devices.CustomerElectric device, electric parts, automobile parts, HDD field.
F1-CLEAN (Vacuum Ultrasonic Cleaning System. Degreaser.)
Leader in Vacuum Ultrasonic Cleaning Systems in the world.
Vacuum Ultrasonic cleaning machines. Parts drying machines. Scalar Robot Transfer cleaning machines. Solvent- based, Hydrocarbon- based, DI-water and Detergent parts cleaning machines. Hydrocarbon Distiller. Spin dryer. Vacuum dryer. Environmental testing unit & pressure de-bubbling unit. Autoclave for LCD, acrylic panel, glass, electric devices.CustomerElectric device, electric parts, automobile parts, HDD field.
F1-CLEAN (Vacuum Ultrasonic Cleaning System. Degreaser.)
Vacuum ultrasonic cleaning machine. Patented in U.S.A. & JAPAN.Pressure tight / Airless Vacuum Ultrasonic Cleaning system. Perfect seal off.
SOLVENTS (DEGREASER)
n-PB (n-Propyl Bromide), HFE(3M), Chlorinated solvents (TCE=Trichloroechioen, Methylen Chloride, Dichloromethane), HCFC’s.
nPB (n Propyl Bromide) is best degreaser and the alternative cleaning solvent for TCE and methylen chloride.
Removal of Greases, Oils, Solder Flux, Resin, Paste, Adhesives, Waxes, Metal chips, small particles from metal parts and substrates.
All cleaning processes are processed under vacuum. The cleaning chamber, reserve tank and distiller are pressure tight structures such as gas cylinder. The cleaning solvent are sealed off in the pressure tight tanks.
SOLVENTS (DEGREASER)
n-PB (n-Propyl Bromide), HFE(3M), Chlorinated solvents (TCE=Trichloroechioen, Methylen Chloride, Dichloromethane), HCFC’s.
nPB (n Propyl Bromide) is best degreaser and the alternative cleaning solvent for TCE and methylen chloride.
Removal of Greases, Oils, Solder Flux, Resin, Paste, Adhesives, Waxes, Metal chips, small particles from metal parts and substrates.
All cleaning processes are processed under vacuum. The cleaning chamber, reserve tank and distiller are pressure tight structures such as gas cylinder. The cleaning solvent are sealed off in the pressure tight tanks.
Degassed solvent made by vacuum ultrasonic, makes strong ultrasonic sound pressure. The Cleaning solvent enter inside the blind holes easily. Good for parts gap and parts blind hole precision cleaning. High cleaning efficiency, especially micro gaps and small size parts.
Danger:
Using conventional vapor degreaser, such as 2 tanks or 3 tanks cleaning machines with condensing coils, are very dangerous for operators because of solvent evaporation, vapor losses & gas leakage from the open top design of the cleaning tanks. And also, the parts couldn’t be dried perfectly. Density regulation of n-PB in workshop is 25ppm.
In cleaning, operators are handling cleaning baskets over the cleaning tanks. n-PB and HFE’ s are volatile solvents. It’s hard to keep 25ppm over the cleaning tanks. So, operators inhale n-PB solvent gas. These machines also consume large amount of volatile cleaning solvent because the Condensing coils cannot prevent solvent evaporation, vapor losses & leakage.
These conventional cleaning machines cannot keep workshop clean, cannot save the operators from solvent and cannot save solvent costs.
Conventional cleaning machines cannot use n-PB as direct replacement for chlorinated solvent such as TCE.
Why don’t you keep your workshop clean & safe by using “ F1-CLEAN”.
n-Proply Bromide is alternative solvent for CFC’s, TCE (Trichloroethylene), 1-1-1Trichioloethane, HCFC-141b and Methylene Chloride. EPA (U.S.A.) permitted n-PB as alternative degreaser solvent for chlorinated solvent such as TCE.
HFE’s :HFE-7100, HFE-7200 (3M) for particle cleaningBest performances for remove small particles. Non flammable. Low surface tension.CMOS sensors, CCD camera parts, crystal oscillators, semiconductor parts, precision sensors, MEMS, HDD head parts, etc.
SAKURA supplies advanced ZERO CONTAMINATION CLEANING technologies with vacuum ultrasonic ( V-SONIC). Enable to wash narrow gap.Zero Contamination Challenge in polished corn shaped vacuum ultrasonic chamber, Several Ultrasonic frequency (40KHz, 70KHz, 80KHz, 100KHz, 120KHz, 130KHz, 170KHz, 200KHz) & Scalar Robot Transfer system.
SAKURA vacuum cleaning chamber can prevent dirt re-adhesion by polished corn shaped structure and filtration.
HDD motor parts, HDD head parts, PCB, FPC, BGA, Flip Chip package, CMOS sensors, CCD camera parts, crystal oscillators, semiconductor parts, precision sensors for automobile, MEMS, etc.
Support and MaintenanceJapan, U.S.A. (California), Thailand (Bangkok), Philippines (Metro Manila).
Please contact us.
SAKURA JAPAN. http://www.sakurajp.com/hp/tiyoda/CLEAN/index.html
SAKURA U.S.A. http://www.f1serv.com/
SAKURA PHIPPINES. http://www.geocities.com/wash_ent/web.html
Sales Maintence: JAPAN, U.S.A., Philippines, Thailand.
SAKURA SEIKI Co.,Ltd. (JAPAN)
Established 1917,
Employee 490, Capital US$2.4million.
Main Products. Ultrasonic Cleaning machine, Airless Vapor Degreaser.
Using conventional vapor degreaser, such as 2 tanks or 3 tanks cleaning machines with condensing coils, are very dangerous for operators because of solvent evaporation, vapor losses & gas leakage from the open top design of the cleaning tanks. And also, the parts couldn’t be dried perfectly. Density regulation of n-PB in workshop is 25ppm.
In cleaning, operators are handling cleaning baskets over the cleaning tanks. n-PB and HFE’ s are volatile solvents. It’s hard to keep 25ppm over the cleaning tanks. So, operators inhale n-PB solvent gas. These machines also consume large amount of volatile cleaning solvent because the Condensing coils cannot prevent solvent evaporation, vapor losses & leakage.
These conventional cleaning machines cannot keep workshop clean, cannot save the operators from solvent and cannot save solvent costs.
Conventional cleaning machines cannot use n-PB as direct replacement for chlorinated solvent such as TCE.
Why don’t you keep your workshop clean & safe by using “ F1-CLEAN”.
n-Proply Bromide is alternative solvent for CFC’s, TCE (Trichloroethylene), 1-1-1Trichioloethane, HCFC-141b and Methylene Chloride. EPA (U.S.A.) permitted n-PB as alternative degreaser solvent for chlorinated solvent such as TCE.
HFE’s :HFE-7100, HFE-7200 (3M) for particle cleaningBest performances for remove small particles. Non flammable. Low surface tension.CMOS sensors, CCD camera parts, crystal oscillators, semiconductor parts, precision sensors, MEMS, HDD head parts, etc.
SAKURA supplies advanced ZERO CONTAMINATION CLEANING technologies with vacuum ultrasonic ( V-SONIC). Enable to wash narrow gap.Zero Contamination Challenge in polished corn shaped vacuum ultrasonic chamber, Several Ultrasonic frequency (40KHz, 70KHz, 80KHz, 100KHz, 120KHz, 130KHz, 170KHz, 200KHz) & Scalar Robot Transfer system.
SAKURA vacuum cleaning chamber can prevent dirt re-adhesion by polished corn shaped structure and filtration.
HDD motor parts, HDD head parts, PCB, FPC, BGA, Flip Chip package, CMOS sensors, CCD camera parts, crystal oscillators, semiconductor parts, precision sensors for automobile, MEMS, etc.
Support and MaintenanceJapan, U.S.A. (California), Thailand (Bangkok), Philippines (Metro Manila).
Please contact us.
SAKURA JAPAN. http://www.sakurajp.com/hp/tiyoda/CLEAN/index.html
SAKURA U.S.A. http://www.f1serv.com/
SAKURA PHIPPINES. http://www.geocities.com/wash_ent/web.html
Sales Maintence: JAPAN, U.S.A., Philippines, Thailand.
SAKURA SEIKI Co.,Ltd. (JAPAN)
Established 1917,
Employee 490, Capital US$2.4million.
Main Products. Ultrasonic Cleaning machine, Airless Vapor Degreaser.
No comments:
Post a Comment